Upgrade Procedure

PS-300B Upgrade Procedures

Before upgrading

  • Login as the user who has administrative privilege.
  • Quit PS-300B if it is on.
  • Insert the PS-300B (version 1.0 or newer) CD-ROM to the disk drive.
    (If the auto-play is set, PS-300B installer automatically starts. Close the installer.)
    1. Start the downloaded upgrade program.
double-click the downloaded PS300B230Up.EXE
    2.Click the "Install PS-300B" button.
Install PS-300B
    3.Select the PS-300B (version 1.0 or newer) product CD-ROM and then click "OK".
Select the PS-300B.
    4. Follow the on-screen instructions to upgrade the software.
    The following display appears when the upgrading is completed.
Completed.
    5. At first startup of the PS-300B application, enter "Key ID" and "Password".
Startup of the PS-300B application.

If the error message appears

Error message Solution
Invalid key ID or password. Enter the Key ID and Password written on the PS-300B (version 1.0 or newer) CD-ROM case.
PS-300B install CD is not inserted. Insert the PS-300B (version 1.0 or newer) CD-ROM to the disk drive, and then try again.
An old version is already installed. To install this product, you must first uninstall the existing version. Uninstall the old PS-300B with the Windows control panel, and then try again.
If unable to uninstall, check “Force overwriting the old software” and then try again.

Support Information

For consultations or inquiries about products, functions, operations and repair of the products
Go back to PS-300B Upgrade program