RH-982A
RH-982A
- ・Fine finishing of button holes.
- ・Max. sewing speed 2,500 sti/min improves productivity.
- ・Large arm pocket allowing smooth material handling.
- ・Easy-to-use operation panel.
Information
Overview
The world’s highest max. sewing speed 2,500 sti/min enhances productivity
The maximum sewing speed of 2,500 sti/min has been achieved by the adoption of an optimal machine structure for high-speed drive. The speed is significantly enhanced from the former 2,200 sti/min level. By enhancing the rigidity of the needle bar-area parts (patent pending) and having the feed mechanism and needle bar rotating mechanism servo-controlled, the operating time has been reduced, resulting in 13% reduction of the machine time compared with the conventional model.
Fine finishing of button holes.
With the highly-rigid feed mechanism with servo control, stitch point is very precise and feed drifting, which is specific to electronic sewing machines, does not occur even in high-speed sewing of weighty mate-rials. The servo control also makes home position de-tection unnecessary.The shape of the looper, the thread take-up amount and some other parts have been reviewed. Skipped stitches and insufficient thread tightening due to a change of thread tension are reduced, regardless of types of threads. The range of sewing capability has been enlarged.
Large arm pocket providing ease of operation
The arm pocket of 120 mm depth gives a sufficient space, enabling material setting smooth. It is the most suitable for sewing of vertical buttonholes and hip pocket parts. The arm shape provides a good view of the needle area, allowing operators to observe the sewing operation.
Sewing with less noise
With thorough review of the mechanisms causing noise, quieter sewing even at higher sewing speed than the conventional model has been realized. The machine is made with a sound design gentle to ears, eliminating impact noise. The vibration of the feed base which is transmitted to an operator is also reduced. The working environment with less operator fatigue can be materialized.
Features
Specifications
| Specifications | -00 | -01 | -02 | |
|---|---|---|---|---|
| Thread trimmer | Upper thread trimmer | Long thread cut | Long thread cut | Short thread cut |
| Lower thread trimmer | None | Long thread cut | Short thread cut | |
| Main applications | Ladies wear | Men's wear, casual wear | Jeans | |
| Other applications | Only the upper thread is cut by the thread trimmer. Buttonholes up to 50 mm long can be sewn. | Ladies wear,jeans,trousers | ||
| Features | Only the upper thread is cut by the thread trimmer. Buttonholes up to 50 mm long can be sewn. |
All the threads are cut long by the thread trimmers. The long thread ends can be securely held in the subsequent process. It is suitable for cases that require accurate short end or manual trimming. |
All the threads are cut short by the thread trimmers. This saves the trouble of manual trimming and reduces consumption of the thread. |
|
| Sewing shape |  |
 |
 |
|
| Sewing length | Eyelet buttonhole : 8-50 mm Straight buttonhole : 5-50 mm |
Eyelet buttonhole : 8-42 mm Straight buttonhole : 5-42 mm |
L1422：14-22mm*3 L1826：18-26mm L2230：22-30mm L2634：26-34mm*3 L3442：34-42mm*3 |
|
| Length of work clamp (Standard) | 30mm | 30mm | ||
| Length of hammer (Standard) | 22mm | 24mm | ||
| Length of hammer (Accessory) | 30mm | 28mm | ||
| Sewing speed | 1,000-2,500sti/min | |||
| Stitch pitch | 0.5～2.0mm | |||
| Zigzag width | 1.5-5.0 mm (Up to 4.0 mm in mechanical, up to 5.0 mm with zigzag width compensation) | |||
| Zigzag width (Factory setting) | 3mm | |||
| Taper bartack length | 0-20mm | |||
| Height of work clamp | 12 mm as standard (Available up to 16 mm) | 16mm | ||
| Starting method | Foot switch (Treadle type, Two-pedal type), Hand switch (Two-lever type) | |||
| Feed mechanism | Intermittent feed by 3 pulse motors (X, Y, θ) | |||
| Needle*4 | DOx558 Nm80 - Nm120 (SCHMETZ) | |||
| Needle(Factory setting)*5 | DOx558 Nm100 | DOx558 Nm90 | DOx558 Nm110 | |
| Languages supported for operation panel | Japanese, English, Chinese, German, French, Spanish, Italian, Portuguese, Turkish, Indonesian, Vietnamese and Russian | |||
| Safety equipment | Emergency stop function and built-in automatic stopping device activated by safety circuit in case of trouble | |||
| Upper shaft motor | AC servo motor 550W | |||
| Air pressure | Main regulator: 0.5 Mpa, Hammer pressure regulator: 0.4 MPa | |||
| Air consumption | 43.2 l/min. (8 cycles/min.) | |||
| Weight | Machine head: Approx. 120 kg.,Operation panel: Approx. 0.6 kg., Control box: 14.2-16.2 kg. (depending on the destination) | |||
| Power supply | Single phase 100V/200V, 3-phase 200V/220V/380V/400V, 400VA | |||
