Customized Devices

• Good for sports pants buttonhole process.
• The machine can make 2 button holes in 1 cycle.

• Good for polo shirts buttonhole process
• Machine can make 2 or 3 buttonholes in 1 cycle.
• After finishing 1st sewing, it starts 2nd and 3rd sewing automatically by vertical device's feeding the sewing material front to back.
  *Maximum feeding distance is 100mm.(Adjustable 20-100mm)

• Automatic motor type feeding mechanism
• Manual feed & auto-feed mode exchange
• Applicable to shirt placket, cuff, and collar
• Cylinder controlled thread loose mechanism optional
• Button feeding stability 99.8%

*This device is manufactured by IMB, Brother's partner company.
*IMB and machine names are the registered trademarks of Changzhou Wisdom & Valley Electrical Technology Co., Ltd.

• Good for label attaching process and magic tape attaching process.
• Air Clamp system.
• Can be expanded to 50x40 with option device.

• Good for eyelet hole process.
• As the clamp can be open & close, in order for after the sewing of eyelet hole, the holes can be made tighter.

• Good for eyelet hole of a cap.
• 2 processes which are "Making hole" and "Stitching" can be done in one operation.

• Good for label attaching on the edge of fabric.
• Stitching quality gets more stable than manual sewing.
• Enables to increase productivity by 40-50%.
• [Label size] Width: max.50mm, Length: max.25mm, Thickness: 0.5-1.5mm

• Good for Belt loop process
• Operators can sew up & bottom of the materials easily
• Clamp foot: L (27mm x 3mm) / S (16mm x 3mm)

• Clamp for the Elastic joint sewing.
• Expansion kit for sewing area 50x40 (SB7777-001) is recommended as an option.

• Support holding the fabric just around the needle, avoiding skip stitch, good for soft fabrics.

• Wide variety of sewing capabilities such as hook and loop fastener and applique.
• Additional option devices are available.

• This device will hold the thread at the sewing start.
• Good for avoiding skip stitch at sewing start.

• Good for label attaching and magic tape attaching process.
• This device gives stable stitching quality & higher productivity.

• Good for label attaching process.
• Productivity gets more than 2 times compared to single needle lock stitch sewing machine.
• Stitching quality is stable.
• Enables to avoid human error.

• Max. sewing area: 650mm x 380mm
• "Skipped Stitch" and "Thread breakage" detection functions prevent the outflow of defective sewing products.
• "Fabric thickness detection" prevents sewing errors in advance.

• Good for reducing bird's nest.
• Both thread take-up device and thread nipper device are recommended.

• Change pattern number by the barcode.
• Enables to avoid operator's mistake with un-matching Zig & pattern number.
• Using Barcode together with Auto-lock sensor & Cassette clamp system is more effective.

• Auto eject system, sewing by pallet.
• Using Cassette clamp system together with Auto lock sensor & Barcode is more effective.

• It locks automatically by detecting PIN on a cassette clamp.
• Using Auto lock sensor together with Cassette clamp system & Barcode is more effective.

• This device can hold the fabric or pallet near the needle.
• Reduce the risk of skip stitch.

• This device can hold the needle thread.
• Reduce the risk of skip stitch at start sewing.

• This device can detect the skip stitch.
• Machine can stop when skip stitch occurs.

• Ejector kit for airbag sewing.

• 3 modes can be selected according to the labeling method: No add on material / Add on bottom side / Add on top side
• Easy operation with LCD touch panel.
• 3 processes in: Line cutting process / Label bundling process / Label stitching process
• Clean sewing without oil staining.

• Good for attaching shoelace tongue loop.
• It enables to attach 3 loop types.
• Easy operation with LCD touch panel.
• The system performs lace loop heat-cutting, folding, and placement automatically.
• Clean sewing without oil staining.
• Low noise and low vibration.